optoway trsl-5380g *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v2.0 1 trsl-5380g / TRSL-5380AG / trsl-5380cg / trsl-5380acg 3.3v / 1550 nm / 622 mbps rohs compliant sff lc single-mode transceiver ********************************************************************************************************************************************************************** features l duplex lc single mode transceiver l sonet oc-12 lr-2 / sdh stm-4 (l-4.2) compliant l small form factor, rj-45 size, 2x5 pin package l 1550 nm dfb ld transmitter l 26 db link power budget at least l lvpecl signal input / output l lvttl transmitter disable input l lvpecl signal detect output: trsl-5380g l lvttl signal detect output: trsl-5380cg l single +3.3 v power supply l 0 to 70 o c operating: trsl-5380g l -20 to 85 o c operating : TRSL-5380AG l wave solderable and aqueous washable l class 1 laser international safety standard iec-60825 compliant applications l atm 622 mbps links l sonet/sdh equipment interconnect l fiber channel 533 mb/s links description the trsl-5380g series single mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as sonet oc-12 lr-2 / sdh stm-4 (l-4.2) and fiber channel. this module is designed for single mode fiber and operates at a nominal wavelength of 1550 nm. a guaranteed minimum optical link budget of 26 db is offered which can correspond to a link distance of over 80 km (assuming worst case fiber loss of 0.25 db/km). the transmitter section uses a multiple quantum well 1550 nm dfb laser and is a class 1 laser compliant according to international safety standard iec-60825. the receiver section uses an integrated ingaas detector preamplifier (idp) mounted in an optical header and a limiting post-amplifier ic. a pecl logic interface simplifies interface to external circuitry. laser safety this single mode transceiver is a class 1 laser product. it complies with iec-60825 and fda 21 cfr 1040.10 and 1040.11. the transceiver must be operated within the specified temperature and voltage limits. the optical ports of the module shall be terminated with an optical connector or with a dust plug. order information p/no. bit rate (mb/s) sonet /sdh distance (km) wavelength (nm) package temp. ( o c) tx power (dbm) rx sens. (dbm) rohs compliant trsl-5380g 622 lr-2/l-4.2 80 1550 dfb 2x5 lc 0 to 70 2 to -3 -29 yes TRSL-5380AG 622 lr-2/l-4.2 80 1550 dfb 2x5 lc -20 to 85 2 to -3 -29 yes absolute maximum ratings parameter symbol min max units notes storage temperature tstg -40 85 o c operating temperature topr 0 -20 70 85 o c trsl-5380g TRSL-5380AG/air flow 1m/sec soldering temperature --- 260 o c 10 seconds on leads only power supply voltage vcc 0 4.5 v input voltage --- gnd vcc v output current iout 0 30 ma recommended operating conditions parameter symbol min typ max units / notes power supply voltage vcc 3.13 3.3 3.47 v operating temperature topr 0 -20 70 85 o c / trsl-5380g o c / TRSL-5380AG/air flow 1m/sec data rate 50 622 mb/s power supply current icc 200 300 ma
optoway trsl-5380g *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v2.0 2 transmitter specifications (0 o c < topr < 70 o c, 3.13v < vcc < 3. 47v) parameter symbol min typ max units notes optical optical transmit power po -3 --- 2 dbm 1 output center wavelength l 1480 1580 nm output spectrum width dl --- --- 1 nm -20 db width extinction ratio e r 10 --- --- db output eye compliant with bellcore gr-253-core and itu recommendation g.957 optical rise time t r 1.2 ns 10% to 90% values optical fall time t f 1.2 ns 10% to 90% values relative intensity noise rin -120 db/hz total jitter tj 0.55 ns 2 electrical data input current C low i il -350 m a data input current C high i ih 350 m a differential input voltage v ih - v il 300 mv data input voltage C low v il - v cc -2.0 -1.58 v 3 data input voltage -- high v ih - v cc -1.1 -0.74 v 3 disable input voltage -- low v tdis,l 0 0.5 v tx output enabled disable input voltage -- high v tdis,h vcc C 1.3 vcc v tx ouput disabled shut off time for txdis t dis 1 ms notes: 1. output power is power coupled into a 9/125 m m single mode fiber. 2. measured with a 2 23 -1 prbs with 72 ones and 72 zeros. 3. these inputs are compatible with 10k, 10kh and 100k ecl and pecl inputs. receiver specifications (0 o c < topr < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes optical sensitivity --- --- --- -29 dbm 1 maximum input power pin -5 --- dbm signal detect -- asserted pa --- --- -29 dbm transition: low to high signal detect -- deasserted pd -40 --- --- dbm transition: high to low signal detect -- hysteresis 1.0 --- db wavelength of operation 1100 --- 1600 nm electrical data output voltage C low v ol - v cc -2.0 -1.58 v 2 data output voltage C high v oh - v cc -1.1 -0.74 v 2 signal detect output voltage -- low v ol - v cc -2.0 -1.58 v signal detect output voltage -- high v oh - v cc -1.1 -0.74 v trsl-5380g signal detect output voltage -- low v ol 0.5 v signal detect output voltage -- high v oh 2.0 v trsl-5380cg notes: 1. minimum sensitivity and saturation levels at ber=1e-10 for a 2 23 -1 prbs with 72 ones and 72 zeros. 2. these outputs are compatible with 10k, 10kh and 100k ecl and pecl outputs.
optoway trsl-5380g *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v2.0 3 connection diagram pin symbol notes 1 v ee r directly connect this pin to the receiver ground plane 2 v cc r +3.3v dc power for the receiver section 3 sd active high on this indicates a received optical signal. 4 rd - receiver dataout bar. see recommended circuit schematic 5 rd+ receiver dataout. see recommended circuit schematic 6 v cc t +3.3v dc power for the transmitter section 7 v ee t directly connect this plan to the transmitter ground plane 8 tdis transmitter disable. connect this pin to +3.3v ttl logic 1 to disable module to enable module connect to ttl logic low 0 9 td+ transmitter data in. see recommended circuit schematic 10 td- transmitter data in bar. see recommended circuit schematic ms ms mounting studs. connect to chassis ground recommended circuit schematic v e e r 1 v c c r 2 s d 3 r d - 4 r d + 5 v c c t 6 v e e t 7 t d i s 8 t d + 9 t d - 1 0 sff2x5 tdis(lvttl) 1uh 10uf 10nf 10uf 10nf vcc3.3v 1uh 10uf 10nf 1k phy device td- td+ rd+ rd- sd 130r 82r vcc3.3v 130r 82r vcc3.3v vcc3.3v lvpecl vcc3.3v lvpecl to lvpecl stage 150ohm 150ohm microstrip2 z=5or microstrip1 z=50r microstrip4 z=5or microstrip3 z=50r note: 1. 1000 sd output pull-down resistor required for trsl-5120g / trsl-5120ag (lvpecl sd output) 2. no pull-down resistor required for trsl-5120cg / trsl-5120acg (lvttl sd output) 3. veer and veet are not internally connected to each other. 4. 50 line pattern and component placements on td+/td- and rd+/rd- lines shall be symmetrical for better impedance matching.
optoway trsl-5380g *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v2.0 4 package diagram units in mm 1) standard case trsl-5380g / TRSL-5380AG / trsl-5380cg / trsl-5380acg 2) extended case trsl-5380eg / trsl-5380aeg / trsl-5380ceg / trsl-5380aceg note: specifications subject to change without notice.
|
